Unify CP200 Administrator Documentation

Administration
A31003-C1000-M101-1-76A9, 03/2016
130 OpenScape Desk Phone CP200/400/600, Administrator Documentation
administration.fm
Feature Configuration
3.8.5 Call Transfer
3.8.5.1 Transfer on Ring
If this function is active, a call can be transferred after the user has dialled the third participant’s
number, but before the third party has answered the call. This feature is enabled or disabled in
the User menu. The default is "Yes".
Administration via WBM (User menu)
User > Configuration > Outgoing calls
Administration via Local Phone (User menu)
3.8.5.2 Transfer on Hangup
This feature applies to the following scenario: While A is talking to B, C calls A. A accepts the
call, so B is on hold and the call between A and C is active. If Transfer on hangup is enabled,
and A goes on-hook, B gets connected to C. If disabled, C will be released when A hangs up,
and A has the possibility to reconnect to B. By default, the feature is disabled.
|
--- User
|
--- Configuration
|
--- Outgoing calls
|
--- Transfer on ring
Autodial delay (seconds)
Allow callback
Outgoing calls
Submit
Reset
6
Allow busy when dialing
Allow transfer on ring
Allow immediate dialing
;
;

Unify CP200 Specifications

General

Brand	Unify
Model	CP200
Category	Telephone
Language	English