Administration
A31003-C1000-M101-1-76A9, 03/2016
70 OpenScape Desk Phone CP200/400/600, Administrator Documentation
administration.fm
IP Network Parameters
3.4.7.3 Terminal Hostname
The phone’s hostname can be customised.
The corresponding DNS domain is configured in Network > General IP configuration > DNS
domain (see Section 3.4.7.1, “DNS Domain Name”).
The current DNS name of the phone is displayed at the right-hand side of the banner of the
admin and user web pages, under DNS name. To see configuration changes, the web page
must be reloaded.
The DNS name can be constructed from pre-defined parameters and free text. Its composition
is defined by the DNS name construction parameter Administration > System > System
Identity > DNS name construction. The following options are available:
• None: No hostname is send to the DHCP server during DHCP configuration.
• MAC based: The DNS name is built from the prefix "OIP" followed by the phone’s MAC
address.
• Web name: The DNS name is set to the the string entered in Web name.
• Only number: The DNS name is set to the Terminal number, that is, the phone’s call
number (E.164).
• Prefix number: The DNS name is constructed from the the string entered in Web name,
followed by the Terminal number.
Administration via WBM
System > System Identity
>
DHCP and DNS must be appropriately connected and configured at the customer
site.
>
It is recommended to inform the user about the DNS name of the phone. The
complete WBM address can be found under User menu > Network information >
Web address.
System Identity
Terminal number
Terminal name
Submit
Reset
3338
Display identity
312
Enabled ID
;
Web name
DNS name construction
Only number
To Next Page
Loading...
