Administration
A31003-C1000-M101-1-76A9, 03/2016
86 OpenScape Desk Phone CP200/400/600, Administrator Documentation
administration.fm
Security
Security and Policies > Password > Change User password
Administration via Local Phone
3.5.7 Certificate Policy
3.5.7.1 Online Certificate Check
The Online Certificate Status Protocol (OCSP) is used to check if a certificate to be used has
been revoked. This protocol is used to query an Online Certificate Status Responder (OCSR)
at the point when the certificate is being validated. The address of an OCSR can be configured
on the phone and can also be obtained from the certificate to be checked (which will have the
priority).
• OCSP check: If activated, the configured OCSR is requested to check if the certificate has
been revoked.
• OCSR 1 address: Specifies the IP address (or FQDN) of a primary OCSP responder.
• OCSR 2 address: Specifies the IP address (or FQDN) of a secondary OCSP responder.
Administration via WBM
Security and Policies > Certificates > Generic
|
--- Admin
|
--- Security & policies
|
--- Password
|--- Change Admin password
|
|
--- Current password
|
|
--- New password
|
|
--- Confirm password
|
--- Change User password
|
--- Admin password
|
--- New password
|
--- Confirm password
Change User password
Admin password
New password
Confirm password
Submit
Reset
Generic
Submit
Reset
OCSP check
OCSR 1 address
OCSR 2 address
To Next Page
Loading...
