Unify CP200 - Page 173

administration.fm
A31003-C1000-M101-1-76A9, 03/2016
OpenScape Desk Phone CP200/400/600, Administrator Documentation
173
Administration
Multiline Appearance/Keyset
2. In the Line dialog, set the specific parameters for the line key.
3. (Only relevant if hot line / warm line is to be configured:) The destination for hot line or warm
line is set in User menu > Configuration > Keyset > Lines:
In the local menu, the menu path is the same.
Line
It is recommended that primary lines
are only configured on keys 1 to 6.
This ensures compatibility with athe
mobility feature, when using devices
with 6 or fewer programmable feature
keys.
Key label 1
Primary line
Ring on/off
Ring delay (seconds)
Selection order
Address
Realm
User Identifier
Password
Shared type
Allow Overview
Submit
Reset
0
0
No Action
Hot warm action
Hot warm destination
shared
Key label 1
Address
Primary line
Allow in overview
Lines
0
Submit
Reset
3337
;
Ring on/off
Selection order
Hot/warm line
1
Hot/warm destination
3333
Line
Hot line