Administration
A31003-C1000-M101-1-76A9, 03/2016
176 OpenScape Desk Phone CP200/400/600, Administrator Documentation
administration.fm
Multiline Appearance/Keyset
Data required
• Rollover ring: Determines if a ring tone will signal an incoming call while a call is active.
Value range: "Standard ring", "No ring", "Alert beep", "Alert ring"
Default: "Alert beep"
• LED on registration: Determines if line LEDs will signal SIP registration.
Value range: "Yes", "No"
Default: "Yes"
• Originating line preference: Selects the line to be used for outgoing calls.
Value range: "Idle line", "Primary", "Last", "None"
Default: "Idle line"
• Terminating line preference: Determines which line with an incoming call shall be select-
ed for answering.
Value range: "Ringing line", "Incoming", "Incoming PLP", "Ringing PLP", "None"
Default: "Idle line"
• Line action mode: Determines the consequence for an established connection when the
line key is pressed.
Value range: "Hold", "Release"
Default: "Hold"
• Show focus: Determines whether the line key LED blinks or is steady when it is in use.
Value range: "Yes", "No"
Default: "Yes"
• Reservation timer: Sets the period in seconds after which a line reservation is cancelled.
If set to 0, the reservation timer is deactivated.
Default: 60
• Forward indication: Activates or deactivates the indication of station forwarding.
Value range: "Yes", "No"
Default: "No"
• Preselect mode: Determines whether an incoming call is accepted by a single press on
the corresponding line key or a double press is needed.
Value range: "Single button", "Preselection"
Default: "Single button"
• Preselect timer: Sets the timeout in seconds for accepting an incoming call.
• Bridging enabled (see Admin > Features > Configuration) : When set to "Yes", the user
is allowed to join a call on a shared line. For this purpose, a server based conference is
established.
To Next Page
Loading...
