Unify OpenScape 4000 - Dialing;Calling; Dialing with Handset off; Dial with the Handset On-Hook

102 Making calls
Dialing/Calling
Dialing with handset off
^ Lift the handset.
The input field in Conversations is opened in numeric mode.
j Internal: Enter the phone number.
External: Enter external code and phone number.
Z Confirm when the complete number has been entered.
or
The required contact is shown in the list. Confirm with the Softkey. The connec-
tion is set up.
Dial with the handset on-hook
j Enter digits via the dial pad.
or
. Press the key if a headset is connected.
or
: Press key.
The input field in Conversations is opened in numeric mode.
j Internal: Enter or complete the phone number.
External: Enter or complete the external code and phone number.
Z Confirm when the complete number has been entered.
or
The required conversation is shown in the list. Confirm with the Softkey. The
connection is set up.
Participant answers over loudspeaker:
With handset on hook: Speakerphone mode.
or
^ Lift the handset.
Participant does not answer or is busy:
) Press key. LED goes out.
©
Dial a number...
A
©
082631565
O
Peter Maier O
_
©
A
Georg Simon Ohm O
_