Unify OpenScape 4000 User Guide Hfa

156 Phoning on several lines (multi-line)
Identifying the line used
If several lines are busy at the same time, you can find out which line you are
currently speaking on.
With the programmed function key
Press the programmed “Line in Use” function key.
The line number and line status of the line currently in use are displayed.
Via the Service menu
@ Press the Main Menu key, if needed.
Open using the Softkey.
Open with the Softkey.
€ Scroll.
Select and confirm with the Softkey.
Press the Softkey.
The line number and status of the line currently in use are displayed.
Alternately phoning on several lines
Prerequisite 1: The relevant administrator has determines that the lines are to
be held during line transfer and may only be ended by hanging up the handset
or with the release call key.
Prerequisite 2: You are connected to different call partners on two or more
lines. These could be callers  page 147 or call recipients  page 98.
For example, you are conducting a call on line 1. The line key of the participant
on hold flashes slowly.
Press the slowly flashing line key 2. The first call partner is waiting on line 1.
Press slowly flashing line key 1. The second call partner is waiting on line 2.
You can change as often as you like.
Ending connection on a line key
: Press key. LED goes out.
or
\ Replace the handset.
Line in Use
_
Service/Settings
_
Service menu
-
_
More features
_
Show used line
_
Line 2
£
Line 1
£

Unify OpenScape 4000 Specifications

General

Brand	Unify
Model	OpenScape 4000
Category	Telephone
Language	English