Unify OpenScape 4000 User Guide Hfa

Programming function keys 91
Confirm. The key is programmed.
Setting up a selected dialing key
If you want to set up a selected dialing key on the second level of the device or
OpenScape Key Module 600, you can switch to this level beforehand.
¬ or  Switch to the second level if necessary.
Hold down the Function key in the left panel or on a connected OpenScape Key
Module 600 to which a function is to be assigned, until the programming prompt
is displayed.
or
@ Press the Main Menu key, if needed.
Open using the Softkey.
Select desired page (1 to 2).
Switch to the second level if necessary.
Press and hold the Function key to be programmed.
Confirm.
Confirm
j Enter the phone number and confirm.
Save the setting with the Softkey. The key is programmed.
Save
_
_
Favorites
_
Favorites (1/2)
Page 1
Q
_
Level 2
-
_
_
Edit selected dialling
-
_
Number
-
_
Q
_

Unify OpenScape 4000 Specifications

General

Brand	Unify
Model	OpenScape 4000
Category	Telephone
Language	English