Using Bluetooth 121
Transferring contacts
The Bluetooth function on your OpenScape CP700/CP700X allows you to trans-
fer contacts in vCARD format (file extension: .vcf) from other Bluetooth devices
to your OpenScape CP700/CP700X and save them in the Conversations list.
You can also send entries from the Conversations list as vCards to other Blue-
tooth-enabled devices.
Receiving a vCARD
Prerequisite: The Bluetooth function on your OpenScape CP700/CP700X is
activated ïƒ page 135. A vCard file is stored on your Bluetooth-enabled device
(PC, tablet, mobile telephone, etc.). Start the data transfer.
If a vCard is transmitted, you will be prompted to accept the data transfer.
Example:
Press the Softkey to allow the data transfer.
Saving contacts
Press the Softkey again to save the vCard(s) to the contact list. You will receive
confirmation.
Due to the diverse range of PCs, smartphones, and PDA devices currently
available, we are unable to provide universal instructions on how to trans-
fer vCard files in this manual.
The instructions for data transfer via Bluetooth provided in the relevant
manufacturer documentation should be observed.
Accept
Q
_
Store
Q
_