Unify OpenScape 4000 - Energy Saving Mode

74 Setting up the phone
Energy saving mode
Select the inactivity time after which the OpenScape CP700/CP700X should au-
tomatically dim or turn off the backlight.
You can select the following time combinations for backlight dim / switch off:
• 1 min/5 mins
• 5 mins/20 mins
• 30 mins/2 hrs
• 45 mins/4 hrs
• 60 mins/8 hrs
z You can also configure this setting via the Web interface  page 210.
@ Press the Main Menu key, if needed.
Open using the Softkey.
Open using the Softkey.
if needed j Enter and confirm the User password.
€ Select "Phone".
Open using the Softkey.
Open using the Softkey.
Open using the Softkey
1
.
€ Select the new time in the list.
Using the Softkey, confirm the new background lighting settings.
Save the setting with the Softkey.
Service/Settings
_
$
User settings
-
_
$
Phone
-
_
Energy saving
-
_
Activate after
5 mins/20 minutes
K
_
1. The display shows the current setting
30 mins / 2 hrs
¥
_
Q
_