Unify OpenScape 4000 - Bluetooth Settings; Activating and Deactivating Bluetooth; Changing the Bluetooth Name of Your Openscape CP700;CP700 X

Using Bluetooth 135
Bluetooth settings
Activating and deactivating Bluetooth
z You can also configure this setting via the Web interface  page 210.
@ Press the Main Menu key, if needed.
Open using the Softkey.
Open using the Softkey.
if needed j Enter and confirm the User password.
Open using the Softkey.
Activate with the Softkey. The Bluetooth function is activated and is now avail-
able.
A Bluetooth icon appears in the status bar.
Changing the Bluetooth name of your OpenScape
CP700/CP700X
Here you can determine which name your OpenScape CP700/CP700X should
use to register at other Bluetooth devices.
z You can also configure this setting via the Web interface  page 210.
@ Press the Main Menu key, if needed.
Open using the Softkey.
Open using the Softkey.
if needed j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
ñ
The Bluetooth function was activated for your phone by the administrator.
Service/Settings
_
$
User settings
-
_
$
Bluetooth
-
_
Active
¦_
×
Bluetooth on
By factory default, the Bluetooth name is: OpenScape CP700 BF:4B:7C.
If you are currently in the Bluetooth configuration, then the phone is visible.
If you exit the menu, it will be hidden again after a short time.
Service/Settings
_
$
User settings
-
_
$
Bluetooth
-
_
Configuration
-
_