Unify OpenScape 4000 - Programming Local Features; How to Program a Local Feature

Programming function keys 95
Programming local features
How to program a local feature
Example: "Door opener" set up
Hold down the Function key in the left panel, in the Favorites menu or on a con-
nected OpenScape Key Module 600 to which a function is to be assigned until
the key programming menu is displayed.
or
@ Press the Main Menu key, if needed.
Open using the Softkey.
Select desired page (1 to 2).
Press and hold the Function key to be programmed.
€ Select "Assign local feature".
Confirm.
Confirm.
Confirm. The key is programmed.
_
Favorites
_
Favorites (1/2)
Page 1
Q
_
_
Assign local feature
-
_
Door opener
-
_
DoorOpener 1
Q
_