Programming function keys 97
How to program a function key with Send URL
functionality
Configuration
Hold down the Function key in the left panel, in the Favorites menu or on a con-
nected OpenScape Key Module 600 to which a function is to be assigned until-
the key programming menu is displayed.
or
@ Press the Main Menu key, if needed.
Open using the Softkey.
Select desired page (1 to 2).
Press and hold the Function key to be programmed.
€ Select "Assign local feature".
Confirm.
Confirm.
Confirm. The key is programmed.
Activation
After the key is programmed, the LED lights amber to indicate that the key is
£ busy, so another key press in that state will have no action.
After successful HTTP response from the web server, the LED lights green for 3
£ seconds and a success notification appears. You can now control remote server
actions from your CP phone.
After unsuccessful HTTP response from the web server, the LED lights red for 3
£ seconds and a failure notification appears.
_
Favorites
_
Favorites (1/2)
Page 1
Q
_
_
Assign local feature
-
_
Send URL
-
_
Send URL name
Q
_