Other settings and functions 185
Door opener
Activating the Door opener
Prerequisite: Door opener has been enabled by your administrator.
At first you have to set up a programmable key to open a door.
See also at ïƒ page 95 that explains how to set up a local feature.
Long press the Function key in the left panel or hold down the Function key on
a connected OpenScape Key Module 600 to which you want to assign the
DoorOpener function, until the programming prompt is displayed.
or
@ Press Main Menu key, if needed.
Open using the Softkey.
Select desired page (1 to 2).
Press and hold the Function key to which you want to assign the door.
€ Select "Assign local feature"
Confirm.
Confirm.
Confirm. The key is programmed.
LED displays for door opener keys
Opening the door without receiving a call
Prerequisite: The functionality has to be enabled by your administrator.
When you have configured a programmable key to open the door, you can press
the relevant key to open the door for your visitor without receiving a call from the
door phone.
Press the Function key in the left panel or on a connected OpenScape Key Mod-
ule 600 to which the Door opener function has been assigned.
_
Favorites
_
Favorites (1/2)
Page 1
Q
_
_
Assign local feature
-
_
Door opener
-
_
DoorOpener 1
Q
_
LED Meaning
_
LED off: The door opener is in idle mode.
¤
LED lights green: Door opened
¤
LED lights orange: In progress.
¤
LED lights red: Failure, contact your administrator if the problem per-
sists.
DoorOpener 1
_