136 Using Bluetooth
Open using the Softkey. The current name is displayed.
The predefined name is entered.
j Change to the desired name and conclude your input with the Softkey.
Save the setting by selecting the Softkey.
Managing Bluetooth devices
The following functions are available in the Bluetooth pairing manager:
• Adding Bluetooth devices
• Deleting Bluetooth device list
• Connecting or disconnecting paired Bluetooth devices
• Removing single Bluetooth devices from the list
• Renaming Bluetooth devices in the list
Adding Bluetooth devices
@ Press the Main Menu key, if needed.
Open using the Softkey.
Open using the Softkey.
if needed j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
Paired devices are displayed. Start the search for new devices with the Softkey.
If needed start or set the pairing function on the Bluetooth device.
Located devices are displayed. Repeat the search if needed with the Softkey.
If at least one new device was found, select the relevant Bluetooth device and
open with the Softkey.
Confirm the pairing prompt with the Softkey. The Bluetooth device is paired and
added to the list.
Phone name
K
_
¾
OpenScape CP700 75:7E:FF
Q
_
Q
_
The OpenScape CP700/700x is visible to other Bluetooth devices in the
vicinity when you are in this menu.
If your Bluetooth device has a NFC reader (Near Field Communication), it
can be paired very easily with your OpenScape CP700, see page 118.
Service/Settings
_
$
User settings
-
_
$
Bluetooth
-
_
Paired devices
-
_
Paired devices
Õ
_
Nearby devices
Õ
_
?
Headset
è
_
Accept
Q
_
To Next Page
Loading...
