Unify OpenScape 4000 User Guide Hfa

Using Bluetooth 139
Activating/deactivating audio
If no audio function is provided for your Bluetooth device, you should disable au-
dio in your device's settings. The function is always activated by default.
@ Press the Main Menu key, if needed.
Open using the Softkey.
Open using the Softkey.
if needed j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey.
Paired devices are displayed.
€ Select the relevant Bluetooth device.
« and open it. The status of the device is displayed and activated, for example,
with the icon ˆ for "Proximity Monitoring".
Open the Configuration menu with the Softkey.
€ Select the "Audio" function.
Deactivate with the Softkey.
Save the setting by selecting the Softkey. The icon Ž for the device name was
removed.
Deleting a Bluetooth device from the list
You can delete a single Bluetooth device from the list, for example, if it will no
longer be in the vicinity for an indefinite period.
@ Press the Main Menu key, if needed.
Open using the Softkey.
Open using the Softkey.
if needed j Enter and confirm the User password.
Open using the Softkey.
Open using the Softkey. You receive a message that the OpenScape CP700/
CP700X is now visible for other devices in the vicinity as long as the menu is
open.
Service/Settings
_
$
User settings
-
_
$
Bluetooth
-
_
Paired devices
-
_
You receive a message that the OpenScape CP700/700X is now visible to
other Bluetooth devices while you are in this menu.
†
Smartphone
-Ž
¦_
Configure
U
_
Use for phone audio
¢_
Configure paired device
Q
_
Service/Settings
_
$
User settings
-
_
$
Bluetooth
-
_
Paired devices
-
_

Unify OpenScape 4000 Specifications

General

Brand	Unify
Model	OpenScape 4000
Category	Telephone
Language	English