UniPOS IFS7002 User Manual

UniPOS IFS7002 two signal loops
Instruction Manual Page 55
Revision 11/01.17 Of 145
 If the selected number is higher than 250, the status of Fire alarm zone 250 will be displayed;
 If the zone has not been shaped yet, instead of text message for the zone appears Free zone.
Simultaneously, the number on the Go to field is deleted, i.e. the field is deactivated.
When you press button the fire alarm zone status is being changed alternatively from
DISABLED to ENABLED and reverse; in the panel bottom left section appears a reminder Data not
saved. Changes (disable/enable zone) are accepted if you press button and the Go to field is
empty – then the reminder Data not saved disappears.
12.3.1.2. Menu Devices
The menu is provided to disable and enable addressable fire detectors. It contains two
submenus, having similar layout – for Loop 1 and for Loop 2; enter the submenus to display one of
the following screens:
 If no addressable detectors
are available:
 If disabled addressable
detectors are available – the
first disabled fire detector,
and in the bottom section of
the panel appears the
detector’s text message:
Buttons and seen in the
right panel section allow the user to
switch between the next and the
previous disabled addressable fire
detector (if any).
Using the digit buttons you may
enter in the Go to field a random 3-
digit address for a device in the loop.
To edit the number press button
and the last entered digit will be
deleted.
When you press button after a number is entered in the Go to field, the status of the
addressable fire detector whose number is selected, will be displayed:
 If the selected number is 0, the status of Device 1 will be displayed;
 If the selected number is higher than 125, the status of Device 125 will be displayed.
Mode:DAY LOC АctInp 0000 12:58:22 Mon 22 Mar 2010
FIRE CONTROL PANEL IFS7002
UniPOS
System functions/Disables/Devices Go to:
Disabled Devices - total Loop1 000
Loop 1
DEVICE:
0
1
2
3
4
5
6
7
8
9
С
Mode:DAY LOC АctInp 0000 12:58:22 Mon 22 Mar 2010
FIRE CONTROL PANEL IFS7002
UniPOS
Faults total: 00000
Disables total: 003
Failed Outputs: 00000
Disabled outputs: 001
System functions/Disables/Devices Go to:
Disabled Devices - total Loop1 002
Loop 1
DEVICE: 001 DISABLED
Point 1.001
0
1
2
3
4
5
6
7
8
9
С
С

UniPOS IFS7002 Specifications

General

Brand	UniPOS
Model	IFS7002
Category	Control Panel
Language	English