UniPOS IFS7002 User Manual

UniPOS IFS7002 two signal loops
Instruction Manual Page 64
Revision 11/01.17 Of 145
Press button when the Go to field is empty and a menu containing a group of parameters
for the selected device will be displayed:
 Menu Device parameters;
 Screen Text message.
13.4.3.1. Menu Device parameters
The menu is used for addressable
device parameters set up:
 Device temperature class –
only for addressable devices
type FD7110, FD7120,
FD7130, FD7160 and FD7201;
 Device status – On or Off.
As a heading is displayed the type
of the device:
To edit the parameters use button
– press it to change the
parameter to the next acceptable
value.
If FD7201 or FD7201S device is
setup it could be configured to be
utilized as a conventional line-
monitoring module or a monitored
input. Enter when the activated input
has to be reset and the activated
outputs to be turned off after the input
action on the input has ceased if it is
an input.
Mode: DAY LOC 16:13:30 Tue 23 Mar 2010
SetUp Device 1 Loop 1
Device type: FD7110
Class: A2S
Status: On
Mode: DAY LOC 16:13:30 Tue 23 Маr 2010
SetUp Device 2 Loop 1
Device type: FD7201
Status: On
Class: A2S
Type: Monitored input
Input reset: Automatic

UniPOS IFS7002 Specifications

General

Brand	UniPOS
Model	IFS7002
Category	Control Panel
Language	English