Need help?Do you have a question about the Uponor C-46 and is the answer not in the manual?
Guidelines and warnings for safe installation and operation of Uponor equipment.
Guidelines for determining the best installation position and ensuring necessary conditions.
Details on mounting the controller to a vertical surface, including dimensions and hole positions.
Steps to select the desired operating mode from available heating, cooling, and meltaway options.
Guides sensor selection for Heating or Heating + Cooling modes.
Provides methods to restart the installation wizard if mistakes were made during setup.
Sets the desired indoor temperature for heating modes with indoor sensors.
Details screens accessible from the Climate controller menu, dependent on operating mode.
Enables or disables standby mode to temporarily suspend all control functions.
Sets the target supply circuit temperature for heating.
Sets the target indoor temperature for heating with wired indoor sensors.
Explains T-slope and T-adjustment parameters for modifying the heat curve.
Demonstrates adjusting the heat curve for insufficient heating based on outdoor temperatures.
Sets cooling to always active or enables winter shut-off functionality.
Sets the target supply circuit temperature for cooling.
Sets the target indoor temperature for cooling with wired indoor sensors.
Accesses advanced control parameters like operating mode, response, and frost protection.
Allows changing the primary operating mode of the controller.
Enables frost protection and sets the minimum supply temperature limit.
Configures ECO mode settings for heating, including supply temp setback and profiles.
Modifies the times for switching between comfort and economy modes.
Displays alarms and allows clearing the alarm list.
Displays all unresolved alarms and provides an option to clear the alarm list.
Accesses settings like access level, clock, language, temperature unit, and backlight.
Manages time, date, time format, date format, and auto daylight saving.
Manages radio links between sensors and the controller, including viewing, adding, and resetting.
Displays linked sensors and their battery/signal status.
Explains how to set up summer shut-off for heating to save energy.
Explains how to set up winter shut-off for cooling to save energy.
Explains how to set up seasonal shut-offs for combined heating and cooling modes.
Resolves issues related to missing or undefined sensors connected to the controller.
Addresses problems with mixer valve opening due to connection or configuration issues.
Resolves connection issues between the Climate Controller C-46 and C-56 Radio.
Addresses erratic control due to incorrect sensor settings or types.
Fine-tunes control response and dead zone parameters for erratic actuator behavior.
Improves room temperature response by adjusting Proportional coeff. and Integration time.
Checks fuse and power connection when the controller display is blank.
Corrects clock settings and verifies ECO mode configuration for proper switching.
General| Brand | Uponor |
|---|---|
| Model | C-46 |
| Category | Temperature Controller |
| Language | English |
To Next Page
