Uponor Smatrix Base PULSE User Manual

API connection
Note
API connection only supports external control.
The external system (G) communicates with the room controller (C)
via an Application Programming Interface (API). An external system
can be a heat pump, a smart home system, or a voice control
assistant etc.
• The external system (G) uses an API to communicate with
Uponor cloud services (F).
• Uponor cloud services (F) connect to the communication module
(B) via the local internet connected Wi-Fi router (E).
• The communication module (B) and Wi-Fi router (E) are
connected using either Wi-Fi or efternet.
• The sub room controller (D) communicates via the master room
controller (C).
When is this method is used?
• When external systems, such as heat pumps, smart home
systems, voice control assistants etc, communicate with the
Uponor Smatrix PULSE system.
Uponor Smatrix Base PULSE
|
Installation and operation manual
|
19

Uponor Smatrix Base PULSE Specifications

General

Brand	Uponor
Model	Smatrix Base PULSE
Category	Controller
Language	English