Uponor Smatrix Base PULSE

9 Finishing installation
SI0000204
5
3
1
1
2
4
6
Make a complete check up of the installation:
1. Check that the thermostats are working correctly. Turn
thermostat setpoints to maximum to obtain a heating demand
and make sure that the actuators are running.
2. Set thermostats to the defined operating settings.
3. Close the covers of the room controller.
4. Attach thermostats to the wall.
5. Print and fill in the “Installation report” (separate downloadable
document).
6. Give the printed manuals and all information about the system to
the user.
60
|
Uponor Smatrix Base PULSE
|
Installation and operation manual