Uponor Smatrix Base PULSE User Manual

12.5 Analogue thermostat
functions
Disable timer function (T-143 and T-145 only)
Thermostats T-143 and T-145 have switches on their backs allowing
the user to disable the timer function (Comfort mode) for the channels
controlled by the thermostat. The switch is set to Comfort/ECO from
the factory.
1
2
3
SI0000185
To change the switch to Disable timer:
1. Angle the thermostat from the bracket.
2. Remove it from the wall.
3. Switch to Comfort mode
.
4. Put the thermostat back on the wall.
12.6 Digital thermostat functions
Run mode
During normal operation the thermostat is in run mode.
While in run mode the display shows specific control mode
information.
Control mode
Note
If no button on the thermostat is pressed for about
8 seconds, while in a submenu, the current values will be
saved and the software exits to the settings menu. About
about 60 seconds later, it exits to run mode.
The thermostat has four different control modes, set in the settings
menu.
Change control mode
See Change settings, Page 76, for how to change the setting.
Uponor Smatrix Base T-146
Thermostat function Display text
Room temperature sensor RT
Room temperature sensor and floor temperature
sensor
RFT
Remote sensor RS
Room temperature sensor and outdoor temperature
sensor
RO
Different types of information can be shown in the display when in a
control mode. Use the OK button to toggle between the information
available.
Room temperature sensor
1. Room temperature (default)
Room temperature sensor and floor temperature sensor
1. Room temperature (default)
2. Floor temperature
Remote sensor
1. Remote sensor (default)
Room temperature sensor and outdoor temperature sensor
1. Room temperature (default)
2. Outdoor temperature
Uponor Smatrix Base T-148
Thermostat function Display text
Room temperature sensor RT
Room temperature sensor and floor temperature
sensor
RFT
Remote sensor RS
Room temperature sensor and outdoor temperature
sensor
RO
Different types of information can be shown in the display when in a
control mode. Use the OK button to toggle between the information
available.
Room temperature sensor
1. Room temperature (default)
2. Relative humidity
Room temperature sensor and floor temperature sensor
1. Room temperature (default)
2. Relative humidity
3. Floor temperature
Remote sensor
1. Remote sensor (default)
2. Relative humidity
Room temperature sensor and outdoor temperature sensor
1. Room temperature (default)
2. Relative humidity
3. Outdoor temperature
Uponor Smatrix Base T-149
Thermostat function Symbol
Room temperature sensor
Room temperature sensor and floor temperature
sensor
Remote sensor
Room temperature sensor and outdoor temperature
sensor
Different types of information can be shown in the display when in a
control mode. Use the OK button to toggle between the information
available.
Room temperature sensor
1. Room temperature (default)
2. Alarm list (only shown if an alarm is present)
3. Room temperature, current ECO/Comfort mode, and current
heating/cooling demand
4. Relative humidity
Uponor Smatrix Base PULSE
|
Installation and operation manual
|
75

Uponor Smatrix Base PULSE Specifications

General

Brand	Uponor
Model	Smatrix Base PULSE
Category	Controller
Language	English