Uponor Smatrix Base PULSE User Manual

12 Operate Uponor Smatrix Base
thermostats
12.1
Thermostat type
Two types of thermostats, both analogue and digital, can be used in
an Uponor Smatrix Wave system.
Analogue thermostats
Uponor Smatrix Base T‑141
Uponor Smatrix Base T‑143
Uponor Smatrix Base T-144
Uponor Smatrix Base T-145
The analogue thermostats are controlled by either turning a dial
(T-144 or T-145), adjusting a potentiometer on its back (T-143), or via
the Uponor Smatrix PULSE app (requires communication module).
Digital thermostats
Uponor Smatrix Base T‑146
Uponor Smatrix Base T‑148
Uponor Smatrix Base T-149
The digital thermostats have a display relaying information to the user
and buttons for control.
12.2 Thermostat layout
Uponor Smatrix Base T-141
During normal operation the thermostat is monitored and controlled
via the Uponor Smatrix PULSE app (requires communication
module).
The illustration below shows the parts of the thermostat.
BA
C
CD0000142
Item Description
A Heating/cooling demand LED
B Registration button
C Terminal for communication cable
66
|
Uponor Smatrix Base PULSE
|
Installation and operation manual

Uponor Smatrix Base PULSE Specifications

General

Brand	Uponor
Model	Smatrix Base PULSE
Category	Controller
Language	English