5-7
Operation on the Machine > Program
Registering Programs
Use the procedure below to register a program.
The following procedure is an example of registering the copying function.
1
Display the screen.
1 Press [Copy] on the Home screen.
2 Press the [Program] tab while the copy mode is accessed.
2
Register the program.
1 Press [Add] and press a number (01 to 50) for the program number.
2 Press [Next].
3 Enter the new program name and press [Save].
The program is registered.
To display a registered program on the Home screen, press [Yes] on the confirmation screen that
appears, proceed to step 2-4.
4 Specify the position in which you want to display the icon of registered program.
5 Press [Save].
Recalling Programs
Use the procedure below to recall a registered program.
1
Recall the program.
1 Press [Program] in the Home screen, or the key of the registered program.
Pressing the key of the registered program will recall the program. If you pressed [Program],
proceed to step 1-2.
If you select a program number already registered, the currently registered functions can be
replaced with a new set of functions.
To Next Page
Loading...
Need help?
General
