9-29
User Authentication and Accounting (User Login, Job Accounting) > Job Accounting Setting
Job Accounting
Enable job accounting. Use the procedure below.
1
Display the screen.
1 Referring to Job Accounting Setting on page 9-27, display the job accounting access
screen.
2 Press [Change] of "Job Accounting".
2
Configure the settings.
1 Press [On].
To disable job accounting, press [Off].
2 Press [OK].
Login/Logout
If job accounting is enabled, an account ID entry screen appears each time you use this machine.
Use the procedure below to login and logout.
Login
1 In the screen below, enter the account ID using the numeric keys and press [Login].
When the display returns to System Menu default screen, logout is automatically executed
and the screen to enter the Account ID appears. To continue the operation, enter the
Account ID.
If you entered a wrong character, press the [Clear] key and enter the account ID again.
If the entered account ID does not match the registered ID, a warning beep will sound and
login will fail. Enter the correct account ID.
By pressing [Check Counter], you can refer to the number of pages printed and the number
of pages scanned.
To Next Page
Loading...
Need help?
General
