5-25
Operation on the Machine > Sending
3
Select the color mode.
Check the color of the sending image.
4
Specify the destination.
Select the destination to which to send an image.
5
Select the functions.
Press tabs to display other functions.
6
Press the [Start] key.
Sending starts.
Auto Color Automatically recognizes whether a document is color or
black & white and then scans the document.
Full Color Scans all documents in full color.
Black & White Scans all documents in black & white.
To make more detailed settings, refer to Color Selection on page 6-23.
Specifying Destination (page 5-26)
Send (page 6-4)
To Next Page
Loading...
