Utax 2500ci User Manual

6-60
Using Various Functions > Functions
OHP Backing Sheet
When two or three OHP transparencies are stacked on top of each other, static electricity may make them difficult to
handle. When using OHP Backing Sheet, a paper sheet is automatically inserted between each transparency, making
them easier to handle. Also, the same original page can be printed to the backing sheet for multiple page printing.
Blank Sheet
Outputs a blank backing sheet after printing to a transparency. (* denotes transparency.)
Copied Sheet
After printing to a transparency, copies the same original image to the backing sheet paper. (* denotes transparency.)
NOTE
For transparency film that can be used, refer to Transparencies on page 11-17.
Never load OHP transparencies into trays or cassettes other than the multi purpose tray.
When OHP Backing Sheet is set, the multi purpose tray paper type is automatically set to "Transparency".
If the optional 1,000-Sheet Finisher is installed, you may need to specify the output destination for finished copies. For
details, refer to Paper Output on page 6-21
.
IMPORTANT
Fan through the transparencies before loading.
Up to 10 transparencies can be loaded at one time.
Be sure that paper of the same size and orientation as the transparencies is loaded in the cassette.
Item Value Description
Blank Sheet,
Copied Sheet
Auto, Cassette 1 to 4 Select the media to be fed. When [Auto] is selected,
the machine automatically selects media that matches
the size of the original.
3
*
3
2
1
2
*
1
*
Original Copy
3
3
*
3
2
1
2
2
*
1
1
*
Original Copy

Utax 2500ci Specifications

General

Copy Resolution	600 x 600 dpi
Scan Type	Flatbed, ADF
Scan Resolution	600 x 600 dpi
Max Paper Size	A4
Duplex Printing	Yes
Print Technology	Laser
Print Speed	25 ppm
Copy Speed	25 ppm
Interface	USB 2.0
Scan Format	TIFF, PDF, JPEG
Scan Functions	Scan to Email
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac