5-11
Operation on the Machine > Application
2
Install the application.
1 Press [Add].
2
Insert the removable memory containing the application to be installed into the USB Port (A1).
3 Select the application to be installed and press [Install].
You can view detailed information on the selected application by pressing [Detail].
4 Press [Yes] in the confirmation screen.
Installation of the application begins. Depending on the application being installed, the installation
may take some time.
Once the installation ends, the original screen reappears.
Activating/Deactivating Application
The procedure is as follows.
1
Display the screen.
1 Press the [System Menu] key.
2 Press [ ] and then [Application].
When the message "Removable Memory was recognized. Displaying files. Are you sure?"
is displayed, press [No].
To install another application, repeat steps 2-3 and 2-4.
To remove the removable memory, press [Remove Memory] and wait until the message
"Removable Memory can be safely removed." appears. Then remove the removable
memory.
If the user authentication screen appears, enter your login user name and login password
and press [Login]. For this, you need to login with administrator privileges. The factory
default login user name and login password are set as shown below.
To Next Page
Loading...
Need help?
General
