Utax 2500ci User Manual

5-9
Operation on the Machine > Program
Editing and Deleting Programs
You can change program number and program name, or delete program.
Use the procedure below to edit or delete a program.
1
Display the screen.
1 Press [Program] on the Home screen.
2 Press [Edit].
2
Edit the program.
To edit a program
1 Press the key(s) corresponding to the program number (01 to 50) to change.
2 Press [Edit], and refer to Registering Programs on page 5-7
to change the program number
and program name.
3 Press [Save].
4 Press [Yes] in the confirmation screen.
To delete
1 Press the key(s) corresponding to the program number (01 to 50) to delete.
2 Press [Delete].
3 Press [Yes] in the confirmation screen.
NOTE
To modify the settings of a registered program, recall the program you want to change, change its settings, then refer
to Registering Programs on page 5-7
to re-register the changed program.
Program

Utax 2500ci Specifications

General

Copy Resolution	600 x 600 dpi
Scan Type	Flatbed, ADF
Scan Resolution	600 x 600 dpi
Max Paper Size	A4
Duplex Printing	Yes
Print Technology	Laser
Print Speed	25 ppm
Copy Speed	25 ppm
Interface	USB 2.0
Scan Format	TIFF, PDF, JPEG
Scan Functions	Scan to Email
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac