Utax 2500ci User Manual

8-45
System Menu > Default Setting on the Machine (System Menu)
Security Settings
LAN Interface
Restart Network
HTTP Select whether to communicate using HTTP.
*1
Value: Off, On
HTTPS Select whether to communicate using HTTPS.
*1, *2
Value: Off, On
LDAP Select whether to use LDAP.
Value: Off, On
SNMPv1/v2c Select whether to communicate using SNMP.
*1
Value: Off, On
SNMPv3 Select whether to communicate using SNMPv3.
*1
Value: Off, On
Enhanced WSD Select whether to use Enhanced WSD.
*1
Value: Off, On
Enhanced WSD over SSL Select whether to use Enhanced WSD (SSL).
*1, *2
Value: Off, On
NOTE
Selecting [Off] will disable the functionality of WIA, TWAIN and Network FAX drivers.
*1 The setting will be changed after restarting the device or network.
*2 Set "SSL" to [On] in Security Settings on page 8-45
.
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Item Description
SSL Select whether to use SSL for communication.
Value: Off, On
Item Description
LAN Interface Specify the settings for the LAN interface to be used.
Value: Auto, 10BASE-T Half, 10BASE-T Full, 100BASE-T Half, 100BASE-TX Full, 1000BASE-T
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Item Description
Restart Network Restarts the network.
Item Description

Utax 2500ci Specifications

General

Copy Resolution	600 x 600 dpi
Scan Type	Flatbed, ADF
Scan Resolution	600 x 600 dpi
Max Paper Size	A4
Duplex Printing	Yes
Print Technology	Laser
Print Speed	25 ppm
Copy Speed	25 ppm
Interface	USB 2.0
Scan Format	TIFF, PDF, JPEG
Scan Functions	Scan to Email
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac