8-28
System Menu > Default Setting on the Machine (System Menu)
* This setting is displayed when the optional 1,000-Sheet Finisher is installed. When a punching unit is not installed, this item name is "Staple".
Send
Configure settings for sending functions.
Reserve Next Priority Specify whether the default screen appears when a subsequent copy job is reserved while
printing is in progress. To have the default screen appear, select [On].
Value: Off, On
Quick Setup Registration Select the functions to be registered for Quick Setup.
Six keys of the Quick Setup screen are allocated to typical functions but can be changed as
necessary.
Six items in the following options are available.
Value: Paper Selection, Zoom, Staple/Punch
*
, Density, Duplex, Combine, Collate/Offset,
Original Image, Original Size, Original Orientation, Color Selection, Continuous Scan,
Background Density Adj.
Send
Item Description
Quick Setup Registration Select the functions to be registered for Quick Setup. Six keys of the Quick Setup screen are
allocated to typical functions but can be changed as necessary.
Six items in the following options are available.
Value: Original Size, 2-sided/Book Original
*1
, Sending Size, Original Orientation, File
Format, Density, Original Image, Scan Resolution, FAX TX Resolution
*2
, Color Selection,
Zoom, Continuous Scan, Background Density Adj.
Dest. Check before Send Select whether to display the confirmation screen of destinations after pressing the [Start] key
when performing sending jobs.
Value: Off, On
Color Type Set the color type when you send color documents.
Value: [RGB], [sRGB]
Entry Check for New Dest. When adding new destination, select whether to display the entry check screen to check the
entered destination.
Value: Off, On
Default Screen Set the default screen displayed when you press the [Send] key.
Value: Destination, Address Book
Item Description
To Next Page
Loading...
Need help?
General
