Utax 2500ci - Changing Security Settings

2-41
Installing and Setting up the Machine > Embedded Web Server RX
Changing Security Settings
This section explains how to change the security settings.
1
Display the screen.
Access Embedded Web Server RX by referring to Accessing Embedded Web Server RX on
page 2-40.
2
Configure the Security Settings.
From the [Security Settings] menu, select the setting you want to configure. The configurable
settings are [Device Security], [Send Security], [Network Security], and [Certificates].
NOTE
The configurable settings within [Device Security], [Send Security], and
[Network Security] can also be configured from the machine's System Menu.
For details, see System Menu (page 8-1)
.
For details on settings related to certificates, refer to the Embedded Web Server RX User
Guide.