Utax 2500ci - Page 287

6-41
Using Various Functions > Functions
Item Value Description
Off
1-sided>>
Booklet
Finishing Binding Left,
Binding Right, Binding Top
Select the binding orientation of copies.
Cover Off
Cover:
Front Cover Print
Setting
Not Print, Front Only,
Back Only, Duplex
Select whether to add the cover. Select the
printing method for the cover to be inserted.
Press [Cover], and then [Cover], and specify
the print setting for the cover to be inserted.
Select from [Not Print], [Back Only], [Front
Only], and [Duplex], and press [OK].
Cover:
Back Cover Print
Setting
Not Print, Front Only,
Back Only, Duplex
Original Orientation Top Edge on Top,
Top Edge on Left
Select the orientation of the original document
top edge to scan correct direction. Press
[Original Orientation] to choose orientation of
the originals, either [Top Edge on Top] or [Top
Edge on Left]. Then press [OK].
2-sided>>
Booklet
Original Binding Left/Right,
Binding Top
Select the binding direction of originals.
Finishing Binding Left,
Binding Right, Binding Top
Select the binding orientation of copies.
Cover Off
Cover:
Front Cover Print
Setting
Not Print, Front Only,
Back Only, Duplex
Select whether to add the cover. Select the
printing method for the cover to be inserted.
Press [Cover], and then [Cover], and specify
the print setting for the cover to be inserted.
Select from [Not Print], [Back Only], [Front
Only], and [Duplex], and press [OK].
Cover:
Back Cover Print
Setting
Not Print, Front Only,
Back Only, Duplex
Original Orientation Top Edge on Top,
Top Edge on Left
Select the orientation of the original document
top edge to scan correct direction. Press
[Original Orientation] to choose orientation of
the originals, either [Top Edge on Top] or [Top
Edge on Left]. Then press [OK].
Book>>Booklet Original Binding Left,
Binding Right
Select the binding direction of originals.
Finishing Binding Left,
Binding Right
Select the binding orientation of copies.
Cover Off, Cover Select whether to add the cover. Press
[Cover] to select [Cover], and press [OK].
Original Orientation Top Edge on Top,
Top Edge on Left
Select the orientation of the original document
top edge to scan correct direction. Press
[Original Orientation] to choose orientation of
the originals, either [Top Edge on Top] or [Top
Edge on Left]. Then press [OK].
NOTE
When placing the original on the platen, be sure to place the originals in page order.