Utax 2500ci User Manual

10-18
Troubleshooting > Troubleshooting
*1 You can also enter a full computer name as the host name (for example, pc001.abcdnet.com).
*2 You can also enter login user names in the following formats:
Domain_name/user_name (for example, abcdnet/james.smith)
User_name@domain_name (for example, james.smith@abcdnet)
Cannot send via SMB. Is the network cable connected? Connect the correct network cable
securely.
page 2-6
Have the network settings for the
equipment been configured properly?
Configure the TCP/IP settings properly. page 8-42
Have the folder sharing settings been
configured properly?
Check sharing settings and access
privileges under the folder properties.
―
Has the SMB protocol been set to [On]? Set the SMB protocol setting to [On]. page 5-31
Has [Host Name] been entered
properly?
*1
Check the name of the computer to
which data is being sent.
page 5-31
Has [Path] been entered properly? Check the share name for the shared
folder.
page 5-31
Has [Login User Name] been entered
properly?
*1*2
Check the domain name and login user
name.
page 5-31
Has the same domain name been used for
[Host Name] and [Login User Name]?
Delete the domain name and backslash
("¥") from [Login User Name].
page 5-31
Has [Login Password] been entered
properly?
Check the login password. page 5-31
Have exceptions for Windows Firewall
been configured properly?
Configure exceptions for Windows
Firewall properly.
page 3-36
Do the time settings for the equipment,
domain server, and data destination
computer differ?
Set the equipment, domain server, and
data destination computer to the same
time.
―
Is the screen displaying Send error? Refer to Responding to Send Error. page 10-28
Cannot find the machine
with WSD.
Did you search by specifying the
machine's IP address or host name?
For security reasons, [HTTP] protocol is
set to [Off], and therefore you cannot
search by IP address or host name.
―
The machine makes a
clicking sound before
starting to print or after
printing.
― The machine is adjusting itself. It is not a
machine failure.
―
Cannot send via the e-mail. Is the E-mail send size limit set in the
SMTP server registered on the
machine?
Check the limit value is entered to "E-
mail Size Limit" of [E-mail] setting in
Embedded Web Server RX and change
the value as necessary.
page 2-43
Symptom Checkpoints Corrective Actions
Reference
Page

Utax 2500ci Specifications

General

Copy Resolution	600 x 600 dpi
Scan Type	Flatbed, ADF
Scan Resolution	600 x 600 dpi
Max Paper Size	A4
Duplex Printing	Yes
Print Technology	Laser
Print Speed	25 ppm
Copy Speed	25 ppm
Interface	USB 2.0
Scan Format	TIFF, PDF, JPEG
Scan Functions	Scan to Email
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac