10-32
Troubleshooting > Troubleshooting
Manual Correction
1
Display the screen.
1 Display the "Color Registration" screen as explained in step 1 of Auto Correction.
2 Press [Next] in Manual.
2
Print the chart.
Press [Print] of "Chart". A chart is printed.
On the chart, for each of M (magenta), C (cyan) and Y (yellow), charts for H-1 to 7 and V-1 to
5 are printed.
Chart Example
3
Enter the appropriate value.
1 From charts V-1 to V-5, read only the values from V-3 (center).
Find the location on each chart where 2 lines most closely match. If this is the 0 position, registration
for that color is not required. For the illustration, B is the appropriate value.
2 Press [Next] of "Registration".
3 Press [Change] for the chart to be corrected.
To Next Page
Loading...
