Utax 2500ci User Manual

2-18
Installing and Setting up the Machine > Installing Software
4
Finish the installation.
When "Your software is ready to use" appears, you can use the software. To print a test
page, click the "Print a test page" checkbox and select the machine.
Click [Finish] to exit the wizard.
If a system restart message appears, restart the computer by following the screen prompts.
This completes the printer driver installation procedure.
The TWAIN driver can be installed if the machine and computer are connected via a network.
If you are installing the TWAIN driver, continue by configuring the Setting TWAIN Driver (page
2-22).
NOTE
When you have selected [Device settings] in Windows XP, the dialog box for device setting
will appear after [Finish] is clicked. Configure the settings for options installed on the
machine. Device settings can be configured after the installation is completed. For details,
refer to the Device Settings in the Printing System Driver User Guide on the DVD.

Utax 2500ci Specifications

General

Copy Resolution	600 x 600 dpi
Scan Type	Flatbed, ADF
Scan Resolution	600 x 600 dpi
Max Paper Size	A4
Duplex Printing	Yes
Print Technology	Laser
Print Speed	25 ppm
Copy Speed	25 ppm
Interface	USB 2.0
Scan Format	TIFF, PDF, JPEG
Scan Functions	Scan to Email
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac