3-31
Preparation before Use > Loading Paper
1
Display the screen.
1 Press the [System Menu] key.
2 Press [Cassette/MP Tray Settings].
2
Configure the settings.
1 In "Cassette/MP Tray Settings", select one of [Cassette 1] - [Cassette 7], and press [Next].
Then in "Paper Size", press [Change].
2
For automatic detection of the paper size, press [Auto] and select [Metric] or [Inch] as the unit.
To select the paper size, press [Standard Sizes 1] or [Standard Sizes 2] and select the paper size.
When cassette 1 or 2 is selected, a size not displayed in the standard sizes can be set.
Select [Size Entry], press [+], [-] to enter "X" (horizontal) and "Y" (vertical) dimensions. By pressing [#
Keys], you can use the numeric keys.
If the optional FAX kit is installed, the available media types for printing received faxes are as shown below.
Plain, Recycled, Bond, Vellum, Color, Thick, High Quality, Rough and Custom 1 to 8
Set the paper size of the cassette used for fax reception as follows:
Inch models: Press [Auto] and then [Inch].
Metric models: Press [Auto] and then [Metric].
If the above setting is changed, it will not be possible to print faxes.
To Next Page
Loading...
