7-18
Status/Job Cancel > Device/Communication
"FAX Port 1", "FAX Port 2"
• The information such as sending/receiving and dialing is displayed.
• Press [Line Off] to cancel a fax in sending/receiving. For details, refer to Canceling FAX
Communication on page 7-19.
• Press [Manual RX] to start receiving fax. Use this function when you want to talk to the
sender before receiving the fax originals. For details, refer to the FAX Operation Guide.
• Press [Log] to display the fax transmission history. For details, refer to the FAX Operation
Guide.
"i-FAX"
When [Check New FAX] is pressed, the machine connects to the mail server and starts
reception of any new i-faxes.
Removing the USB Memory
Follow the steps below to remove USB memory safely.
1
Display the screen.
Press the [Status/Job Cancel] key.
2
Press the [Device/Communicate] tab.
3
Press [Remove] in "Removable Memory".
When "Removable memory can be safely removed." is displayed, remove the USB memory.
To Next Page
Loading...
