6-18
Using Various Functions > Functions
Collate/Offset
Offsets the output by page or set.
* If [Off] is selected for "Collate" setting, [Each Page] appears. When [On] is selected, [Each Set] appears.
Item Image Description
Collate Scans multiple originals and delivers complete sets of copies
as required according to page number.
Offset Without Document Finisher (Option) When offsetting is used, printed copies are produced after
rotating each set (or page*) by 90 degrees.
To use offsetting, the same size of paper as the selected paper
tray must be loaded in a different orientation in a different
paper tray.
The paper sizes supported in Offset are A4, B5, Letter and 16K.
With Document Finisher (Option) When offsetting is used, printed copies are produced after
rotating each set (or page*) by 90 degrees.
The optional 1,000-sheet finisher or 4,000-sheet finisher is
required.
The paper sizes supported in Offset are A3, B4, A4, B5, Letter,
Legal, Ledger, Oficio II, 8K, 16K, 216 x 340 mm and Folio.
To Next Page
Loading...
