5-33
Operation on the Machine > Sending
Specifying a New PC Folder
Specify either the desired shared folder on a computer or an FTP server as the destination.
1
In the basic screen for sending, press [Folder Path Entry].
2
Enter the destination information.
1 Press [SMB] or [FTP].
2 Enter the destination information.
Press the key of each item to first display the entry screen.
Enter the destination data and press [OK].
The table below explains the items to be entered.
Refer to Creating a Shared Folder, Making a Note of a Shared Folder on page 3-37 for details on how to share a
folder.
Be sure that SMB Protocol or FTP in the Embedded Web Server RX is On. For details, refer to the Embedded Web
Server RX User Guide.
Entering Characters (page 11-13)
To Next Page
Loading...
