3-53
Preparation before Use > Registering Destinations in the Address Book
Adding a Destination on One Touch Key (One Touch Key)
One Touch Key Add a new destination (contact or group). A maximum of 1,000 destinations can be registered.
1
Display the screen.
1 Press the [System Menu] key.
2
Press in the following sequence: [ ], [Edit Destination], and then [Add/Edit] in "One Touch Key".
2
Add One Touch Keys.
1 Select a One Touch Key number (0001 to 1000) for the destination, and press [Add/Edit].
Pressing [Quick No. Search] key or [No.] enables direct entry of a One Touch Key number.
Select a One Touch Key with no registered destination.
2 Press [Change] of "Display Name".
3 Enter the One Touch Key name (up to 24 characters) displayed in the send base screen,
and press [OK].
4 Press [Change] of "Destination". The address book appears.
5
Select a destination (contact or group) to add to the One Touch Key number, and press [OK].
Pressing [Detail] shows the detailed information of the selected destination.
6 Press [Save].
The destination will be added to the One Touch Key.
• Refer to Specifying Destination on page 5-28 for use of One Touch Key.
• You can add One Touch keys and change their settings on Embedded Web Server RX.
Registering Destinations (page 2-40)
Destinations can be sorted or searched by destination name or address number.
For details, refer to Specifying Destination on page 5-28
.
To Next Page
Loading...
