9-23
User Authentication and Accounting (User Login, Job Accounting) > User Login
Simple Login Settings
The simple login function allows users to log in simply by selecting a user name. Users must be registered in advance to
use this functionality.
Simple Login
Select whether or not simple login is enabled.
1
Display the screen.
1 Referring to User Login Setting on page 9-2, display the user login setting screen.
2 Press [Next] of "Simple Login Settings", and then [Change] of "Simple Login".
2
Configure the setting.
1 Select [On] or [Off].
2 Press [OK].
Simple Login Key
Register users to use simple login. You can add up to 20 users.
1
Display the screen.
1 Referring to User Login Setting on page 9-2, display the user login setting screen.
2 Press [Next] of "Simple Login Settings", and then [Next] of "Simple Login Key".
2
Enter the user information.
1 Press the key to which you want to register a user.
2 Press [Add/Edit].
For user registration, refer to Adding a User (Local User List) on page 9-8.
To use Simple Login, User Login Administration must be enabled in User Login
on page 9-4.
If the guest authentication setting is enabled, Simple login cannot be enabled.
To Next Page
Loading...
