Utax 3005ci

8-7
Setup and Registration (System Menu) > System Menu
Cassette/MP Tray Settings
Select paper size and media type for Cassettes and multi purpose tray.
Cassette1 (to 7)
To fix the type of paper to be used in cassettes 1 or 2 or the optional paper feeders (cassettes 3 to 7), specify the paper
size.
Cassette/MP Tray Settings
Selection Item Selectable Size/Type
Paper Size Auto Paper size is automatically detected and selected.
Value: Metric, Inch
Standard Sizes 1
*1
*1 Only A4, Letter, and B5 can be specified when the optional Large Capacity Feeder (1,500-sheet x 2) and the optional Large
Capacity Side Feeder (500, 1,500-sheet x 2) are used.
Available options are as follows:
Value
Metric models: A3, A4-R, A4, A5-R, B4, B5-R, B5, Folio, 216 x 340 mm
Inch models: Ledger, Letter-R, Letter, Legal, Statement, 12 x 18", Oficio II
Standard Sizes 2
*1
Select from standard sizes except Standard Sizes 1.
Value
Metric models: Ledger, Letter-R, Letter, Legal, Statement, 12 x 18", Oficio II,
8K, 16K-R, 16K
Inch models: A3, A4-R, A4, A5-R, B4, B5-R, B5, Folio, 216 x 340 mm, 8K,
16K-R, 16K
Size Entry
*2
*2 Can be set when cassette 1 or cassette 2 is selected.
Enter a size not displayed in the standard sizes.
Value
Metric
X : 182 to 457 mm (in 1 mm increments)
Y : 140 to 304 mm (in 1 mm increments)
Inch
X : 7.17 to 18.00" (in 0.01" increments)
Y : 5.51 to 12.00" (in 0.01" increments)
Media type Select the media type.
Plain (60 to 105 g/m
2
), Rough, Vellum, Recycled, Preprinted
*3
, Bond*
4
, Color,
Prepunched
*3
, Letterhead
*3
, Thick (106 g/m
2
and more)
*4
,
High Quality and Custom 1-8
*1
*3 To print on preprinted or prepunched paper or on letterhead, refer to Special Paper Action on page 8-12.
*4 To change to a media type other than Plain, refer to Media Type Setting
on page 8-10. When the paper weight settings shown
below are selected, the media indicated for each setting cannot be selected.
Rough: "Heavy 5"
Preprinted: "Heavy 5"
Letterhead: "Heavy 5"
Thick: "Heavy 5"
Custom 1 to 8: "Heavy 5" or "Extra Heavy"
On the 3005ci and 3505ci, the above paper types also cannot be selected when Heavy4 is set.