2-37
Installing and Setting up the Machine > Embedded Web Server RX
Sending E-mail
By configuring the SMTP settings, you can send E-mail notifications on completed jobs.
To use this function, this machine must be connected to a mail server using the SMTP protocol.
In addition, check the following.
• The network environment used to connect this machine to the mail server
A full-time connection via a LAN is recommended.
•SMTP settings
Use Embedded Web Server RX to register the IP address or host name of the SMTP server.
• If limits have been set on the size of E-mail messages, it may not be possible to send very large E-mails.
The procedure for specifying the SMTP settings is explained below.
1
Display the screen.
1
Access Embedded Web Server RX by referring to Accessing Embedded Web Server RX on
page 2-34.
2 From the [Function Settings] menu, click [E-mail].
To Next Page
Loading...
