11-11
Appendix > Character Entry Method
Character Entry Method
To enter characters for a name, use the on-display keyboard in the touch panel following the steps as explained below.
Entry Screens
Lower-case Letter Entry Screen
Keyboard Layout
"QWERTY", "QWERTZ" and "AZERTY" are available as keyboard layouts the same as a PC keyboard. Press the
[System Menu] key, [Common Settings] and then [Change] of "Keyboard Layout" to choose the desired layout.
"QWERTY" layout is used here as an example. You may use another layout following the same steps.
No. Display/Key Description
1 Display Displays entered characters.
2 Limit Display Displays maximum number of characters.
3 Cursor Key Press to move the cursor on the display.
4 [Backspace] Press to delete a character to the left of the cursor.
5 Keyboard Press a character to enter.
6 [Upper-case] Press to use upper-case letters.
7 [Lower-case] Press to use lower-case letters.
8 [No./Symbol] Press to enter numbers and symbols.
9 [Space] Press to insert a space.
10 [Cancel] Press to cancel entered characters and return to the
screen before the entry.
11 [OK] Press to finalize entry and return to the screen before
the entry.
To Next Page
Loading...
