3-46
Preparation before Use > Registering Destinations in the Address Book
2
Add the name.
1 To specify the "Address Number", press [Change] in Address Number.
2 Use [+] / [-] or the numeric keys to enter an address number (1 to 2500).
To have the number assigned automatically, enter "0000".
3 Press [OK].
The screen shown in step 1 reappears.
4 Press [Change] of "Name".
5 Enter the destination name (up to 32 characters) to be displayed on the Address Book and
press [OK].
The screen shown in step 1 reappears.
Address Number is an ID for a destination. You can select any available number out of
2,000 numbers for contacts and 500 numbers for groups.
If you specify an address number that is already in use, an error message appears when
you press [Save] and the number cannot be registered. If you set "0000" as the address
number, the address is registered under the lowest available number.
To Next Page
Loading...
