Utax 3005ci

4-8
Printing from PC > Banner printing
3
Setting the print paper size.
1 Select the custom paper size that you registered in the "Print size" menu.
2 Click the [OK] button.
When you execute printing in this case, a message appears on the machine's operation panel. Place the paper in the
multipurpose tray, continue to support it so that it does not fall, and press [Continue]. To cancel printing, press [Cancel].
NOTE
When KPDL is used for "PDL" Settings of the printer driver, a length setting of 470.5 mm (18.53") or longer is handled
as banner print.
Use MP tray to print on the following paper.
ContinueCancel
Custom 1210x800mm
Set paper and press [Continue].
Job No.: Job Name: User Name: