10-38
Troubleshooting > Troubleshooting
2010
2020
Failed to connect to the Printing
System.
Check the connection to the
Printing System.
> Both machine and machine
interface board
> Firmware versions installed on
the machine and Printing System
— Make a note of the error code
displayed on the touch panel.
Call service.
3000 Failed to connect to the Printing
System.
Check the connection to the
Printing System.
> Network settings
> Both machine and Printing
System
— Turn the main power switch off
and on.
If the error exists, Printing
System failure has occurred.
Make a note of the error code
displayed on the touch panel.
Call service.
Error
Code
Message Checkpoints Corrective Actions
To Next Page
Loading...
