Vacon 100 - Page 113

4 Find the DC grounding busbar between the
terminals R- and U. To remove the busbar from the
frame, remove the M4 screw.
L1
L2 L3
DC-
R-
DC+
R+
U
V
W
T1
T2 T3
5 After the change, write "The EMC level was
changed" and the date on the "product modified"
label. If the label is not attached at this time, attach
it on the drive near the name plate.
Product modified
Date:
Date:
Date:
HOW TO FIND THE EMC JUMPERS, 600/690 V
1 Open the cover of the AC drive.
2 Remove the terminal cover.
COMMISSIONING AND ADDITIONAL INSTRUCTIONS VACON · 113
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
7