Vacon 100 - Mounting; General Information about Mounting; Dimensions for Wall Mounting; Wall Mounting of MR4

4 MOUNTING
4.1 GENERAL INFORMATION ABOUT MOUNTING
Install the AC drive in a vertical position on the wall. If you install the drive in a horizontal
position, it is possible that some functions with the nominal values that are found in chapter
8 Technical data, Vacon® 100 or 9 Technical data, Vacon® 100 FLOW are not available.
Install the AC drive with the screws and other components that you received in the delivery.
4.2 DIMENSIONS FOR WALL MOUNTING
4.2.1 WALL MOUNTING OF MR4
Ø25
Ø25
Ø7
Ø13
IP21
IP54
112
147
128
100
313
100
328
190
151
112
Fig. 2: The dimensions of the AC drive, MR4 [mm]
MOUNTING VACON · 23
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
4